السبت، 3 نوفمبر، 2012

للجالكسي اس ثري روم الجيلي بين البرازيلي الرسمي I9300UBDLI1 4.1.1

المصدر:::: http://xq55.net



---------------------------------------------------------------------------------------------------------
  • شرح فلاش جيلي بين للجالاكسي اس 3 

المصدر:: http://androidcritics.com
We know that lot of Android 4.1.1 Jelly Bean test firmwares were leaked for the Samsung Galaxy S3. Here is an official build that is available for download to flash into your Galaxy s3 via Odin.
Update To Android 4.1.1 Jelly Bean On Samsung Galaxy S3 i9300
Update To Android 4.1.1 Jelly Bean On Samsung Galaxy S3 i9300
Please make sure that:

- This Android 4.1.1 Jelly Bean I9300XXDLIB
is only compatible Galaxy S3 GTi9300  and not is for Sprint, Verizon, AT&T, T-Mobile or others.
- Your Galaxy S3 must running Original ROM and not a custom ROM. If your Galaxy S3 is running Custom Rom, download and flash original ROM into your Galaxy S3.
- Create a backup of your phone in clockworkmod recovery to external storage.
- Battery power at least 80% full.
Download I9300XXDLIB
(zip file) then unzip this file to your PC. Now you will get I9300XXDLIB_I9300OXFDLI1_XEO.tar.MD5
Step 1: Set your phones into USB debugging mode: Settings -> Applications -> Development -> USB debugging.Then turn off your phones.
Step 2: Put your galaxy s3 into download mode by  pressing and holding VolumeDown + Home + Power simultaneously.
Update Samsung Galaxy S3 To Official Jelly Bean Firmware- Android 4.1.1 I9300XXDLIB
Update Samsung Galaxy S3 To Official Jelly Bean Firmware- Android 4.1.1 I9300XXDLIB
Step 3: Download Odin and start ODIN on PC.
Step 4: Connect the device to your computer using USB.
Step 5: Wait a few seconds, the ODIN screen will show that a device is now connected
- If ODIN not detect your device,  then install drivers here and then put your device into download mode. Odin will detect your device when it says COM5,COM6,etc.
Step 6: Click the PDA button, then select I9300XXDLIB_I9300OXFDLI1_XEO.tar.MD5
Step 7: Press “Start”. ODIN will start flash the firmware.
Step 8: After Flash complete, your Galaxy S3 will Boot into Android System Recovery Mode.

Now you need:
In Depth Hands On Of Jelly Bean:
That’s All! Now your Galaxy S3 is running the official Android 4.1.1 Jelly Bean on your samsung galaxy s3 i9300XXDLIB firmware! Thanks for reading this article on how to: Update Samsung Galaxy S3 To Official Android 4.1.1 Jelly Bean XXDLIB Firmware! Feel free to visit androidcritics.com for the latest news,reviews,and more!


0 comments:

إرسال تعليق